Tripp Lite NGI-M08C4POE8-2 Owner's Manual page 216

STRING priority <0-
61440>
configure no spanning-tree mst
instance STRING priority
configure spanning-tree mst
configuration
configure no spanning-tree mst
configuration
mst apply
mst Instance <1-63> vlan
VLANLIST
mst name
mst no name
mst revision
mst no revision
mst show (current|pending)
priority. The priority must be the multiple value of
4096.
This command resets the priority for the specific
instance. The default priority is 32768.
This command enters the MSTP configure node.
This command resets all of configurations for the
MSTP.
This command applies configurations to current
instant.
This command configures the instance and vlan
map. The target vlan number(ex.10) or
range(ex.1-10).
This command configures a region name for the
MSTP.
This command reset the region name for the
MSTP.
This command configures the revision for the
MSTP.
This command resets the revision for the MSTP.
This command shows the MSTP configures.
Current – the working configurations.
Pending – the not applied configurations.
216