Table of Contents
Advertisement
6.11.2.2
Web Configuration
Parameter
Description
PD Alive Check Settings
State
Enables/Disables the PD Alive Check.
Port
Selects a port or a range of ports which you want to configure.
State
Enables/Disables the PD Alive Check for the specific port(s).
IP Address
Specifies the Host IP address which connects to the port.
The interval to send the packet probes to check if the host is still
Interval
alive.
The retry times when no response from the host for the keep-a-live
Retry Time
probe packet.
The action to the Power Device when the system detects that the
Action
Power Device cannot respond the keep-a-live probe packet. The
options have Reboot / Alarm / All /None.
When PD has been rebooted, the PoE port restored power after the
Power Off Time
Power Off Time.
The Switch waits the Start Up Time to do PoE Auto Checking
Start Up Time
when the PD is rebooting.
Apply
Click Apply to take effect the settings.
173
Advertisement
Table of Contents
