Tripp Lite NGI-M08C4POE8-2 Owner's Manual page 250

7.2.1 CLI Configurations
Node Command
enable show access-list
enable configure terminal
configure access-list STRING ip-type
(ipv4|ipv6)
configure no access-list STRING
acl show
acl action
(disable|drop|permit|dscp|802.1p)
acl action dscp remarking <0-63>
acl action 802.1p remarking <0-7>
acl 802.1p VALUE
acl dscp VALUE
acl destination mac
hostMACADDR
acl destination mac MACADDR
MACADDR
acl destination mac MACADDR
MACADDR
acl no destination mac
Description
This command displays all of the access
control profiles.
This command changes the node to configure
node.
This command creates a new access control
profile.
Where the STRING is the profile name. And
you can specify the type, ipv4 or ipv6.
This command deletes an access control
profile.
This command displays the current access
control profile.
This command actives this profile.
disable – disable the profile.
drop – If packets match the profile, the
packets will be dropped.
permit – If packets match the profile, the
packets will be forwarded.
dscp – dscp remark.
802.1p – 802.1p remark.
This command actives this profile and
specify that it is for DSCP remark. And
configures the new DSCP value which will
be override to all packets matched this
profile.
This command actives this profile and
specify that it is for 802.1p remark. And
configures the new 802.1p value which will
be override to all packets matched this
profile.
This command configures the 802.1p value
for the profile.
This command configures the DSCP value
for the profile.
This command configures the destination
MAC and mask for the profile.
This command configures the destination
MAC and mask for the profile.
This command configures the destination
MAC and mask for the profile. The second
MACADDR parameter is the mask for the
profile.
This command removes the destination MAC
from the profile.
250