Tripp Lite NGI-M08C4POE8-2 Owner's Manual page 288

change (disable/enable)
configure snmp trap-event port-link-change
(disable/enable)
configure snmp trap-event power-source-
change (disable/enable)
configure snmp trap-event stp-topology-
change (disable/enable)
configure snmp trap-event traffic-monitor
(disable/enable)
configure snmp trap-event xpress-ring
(disable/enable)
9.1.2.2.2 Web Configurations
Parameter
Trap Event State Settings
Select all
Deselect All
Apply
Refresh
Description
Enables all of trap events.
Disables all os trap events.
Click Apply to take effect the settings.
Click Refresh to begin configuring this screen afresh.
288
port-admin-state-change trap.
This command enables/disables the
port-link-change trap.
This command enables/disables the
power-source-change trap.
This command enables/disables the stp-
topology-change trap.
This command enables/disables the
traffic-monitor trap.
This command enables/disables the
xpress-ring trap.