Arp Inspection - Tripp Lite NGI-M08C4POE8-2 Owner's Manual

7.1.3.1 ARP Inspection

7.1.3.1.1 CLI Configurations
Node Command
enable show arp-inspection
enable configure terminal
configure arp-inspection
(disable | enable)
configure arp-inspection vlan
VLANLISTS
configure no arp-inspection
vlan VLANLISTS
configure interface IFNAME
interface arp-inspection trust
interface no arp-inspection
trust
Example:
L2SWITCH#configure terminal
L2SWITCH(config)#arp-inspection enable
L2SWITCH(config)#arp-inspection vlan 1
L2SWITCH(config)#interface 1/0/1
L2SWITCH(config-if)#arp-inspection trust
7.1.3.1.2 Web Configurations
Description
This command displays the current ARP Inspection
configurations.
This command changes the node to configure node.
This command disables/enables the ARP Inspection
function on the switch.
This command enables the ARP Inspection function on a
VLAN or range of VLANs.
This command disables the ARP Inspection function on
a VLAN or range of VLANs.
This command enters the interface configure node.
This command configures the trust port for the specific
port.
This command configures the un-trust port for the
specific port.
245