Dhcp Snooping; Cli Configurations; Web Configurations - Tripp Lite NGI-M08C4POE8-2 Owner's Manual

D. L2SWITCH(config-if)#dhcp-snooping trust
E. DHCP Client-1: ipconfig /release
F. DHCP Client-1: ipconfig /renew
 DHCP Client-1 can get an IP address.
5. If you configure a static host entry in the DHCP snooping binding table, and then you want
to change the host to DHCP client, the host will not get a new IP from DHCP server, and
then you must delete the static host entry first.

7.1.1.1 DHCP Snooping

7.1.1.1.1 CLI Configurations

Node
enable show dhcp-snooping
enable configure terminal
configure dhcp-snooping
(disable|enable)
configure dhcp-snooping vlan
VLANLISTS
configure no dhcp-snooping vlan
VLANLISTS
Example:
L2SWITCH#configure terminal
L2SWITCH(config)#dhcp-snooping enable
L2SWITCH(config)#dhcp-snooping vlan 1

7.1.1.1.2 Web Configurations

Command
237
Description
This command displays the current DHCP
snooping configurations.
This command changes the node to configure
node.
This command disables/enables the DHCP
snooping on the switch.
This command enables the DHCP snooping
function on a VLAN or range of VLANs.
This command disables the DHCP snooping
function on a VLAN or range of VLANs.