Tripp Lite NGI-M08C4POE8-2 Owner's Manual page 264

7.4.1.2 Web Configurations
Parameter
Port Security Settings
Port Security
Port
State
Maximum MAC
Apply
Refresh
7.4.2 Sticky Mac
Port security with sticky MAC addresses provides many of the same benefits as port security
with static MAC addresses, but sticky MAC addresses can be learned dynamically. Port
security with sticky MAC addresses retains dynamically learned MAC addresses during a link-
down condition.
If you enter a write memory or copy running-config startup-config command, then port
security with sticky MAC addresses saves dynamically learned MAC addresses in the startup-
config file and the port does not have to learn addresses from ingress traffic after bootup or a
restart.
Description
Select Enable/Disable to permit Port Security on the Switch.
Select a port number to configure.
Select Enable/Disable to permit Port Security on the port.
The maximum number of MAC addresses allowed per interface.
The acceptable range is 1 to 1000.
Click Apply to take effect the settings.
Click Refresh to begin configuring this screen afresh.
264