Tripp Lite NGI-M08C4POE8-2 Owner's Manual page 31

Parameter
System Information
Model Name
Host name
Boot Code Version
Current Running
Firmware
Primary Firmware
Version
Built Date
Checksum
Secondary
Firmware
Version
Built Date
Checksum
DHCP Client
IP Address
Subnet Mask
Default Gateway
MAC Address
Serial Number
Management VLAN
CPU Loading
Memory Information This field displays the total memory the Switch has and the memory
Current Time
DHCPv6 Client
Description
This field displays the model name of the Switch.
This field displays the name of the Switch.
This field displays the boot code version.
This field displays the current running firmware, primary or
secondary.
This field displays the version of primary firmware.
This field displays the built date of primary firmware.
This field displays the checksum of primary firmware.
This field displays the version of secondary firmware.
This field displays the built date of econdary firmware.
This field displays the checksum of secondary firmware.
This field displays whether the DHCP client is enabled on the Switch.
This field indicates the IP address of the Switch.
This field indicates the subnet mask of the Switch.
This field indicates the default gateway of the Switch.
This field displays the MAC (Media Access Control) address of the
Switch.
The serial number assigned by manufacture for identification of the
unit.
This field displays the VLAN ID that is used for the Switch
management purposes.
This field displays the percentage of your Switch's system load.
which is currently available (Free) and occupied (Usage).
This field displays current date (yyyy-mm-dd) and time (hh:mm:ss).
This field displays whether the DHCPv6 client is enabled on the
Switch.
31