Web Configuration Interface; Logging Into The Web Configuration Interface - Tripp Lite B072-016-IP2 Quick Start Manual

2. Web Configuration Interface

The NetCommander IP can be accessed in two ways; locally via the local console OSD, or remotely via the Web Configuration Interface.
This section of the manual details the Web Configuration Interface, which can be used to access the computer/servers and other devices
connected to the KVM, as well as to configure the KVM's settings and accounts.

2.1 Logging Into the Web Configuration Interface

Note:
• Before logging on the first time, verify that you have the latest Java installed on your computer (Java 1.6 or higher is required). If not, you
can download and install Java from http://www.java.com/en/download/index.jsp.
• Only SSL connections are allowed, so you must start the IP address with HTTPS, not HTTP .
1. Open your web browser (see the Client Computer Compatibility section of this manual for browser support) and enter in the IP address
of the KVM.
2. When logging into the KVM from your web browser, a Security Alert message appears to inform you that the device's certificate is not
trusted, and asks if you want to proceed. You have two options:
• If you are working on a computer other than your own, accept the certificate for just this session by clicking to proceed.
• If you are working at your own computer, install the certificate. Refer to the Security Certificate Installation section of the Owner's
Manual for further instructions.
3. Upon installing the certificate or accepting the unrecognized
certificate for the current session, the Java application begins
to install. Before the installation completes, a security warning
may appear stating that the connection to this website is
untrusted. This is a security issue similar to one you get from
your web browser. You can choose to continue anyway, or
install the certificate in the Java control panel. Refer to the
Security Certificate Installation section of the Owner's Manual
for further instructions.
4. After installation has completed, the login page appears. If the
login page does not appear on its own, click the Log On button
in the center of the web page to bring it up. If clicking on the Log
On button does not bring up the login page, add /targets.jnlp to
the end of your IP address.
5. Enter in your username and password, and press Enter.
If this is the first time you are accessing the KVM, enter
in the default username (admin) and password (access).
The My Targets page of the Web Configuration Interface
opens, showing the state of your unit, and displaying
all your available Target Servers.
14-03-052 93-328C.indd 9
9
3/14/2014 1:38:00 PM