Port Settings; Cli Configuration - Tripp Lite NGI-M08C4POE8-2 Owner's Manual

6.3.2.3 Port Settings

6.3.2.3.1 CLI Configuration

Node
enable show vlan
enable show vlan <1-4094>
enable configure terminal
configure interface IFNAME
interface acceptable frame type
(all|tagged|untagged)
interface pvid <1-4094>
interface no pvid
configure interface range
gigabitethernet1/0/PORTLISTS
if-range acceptable frame type
(all|tagged|untagged)
if-range pvid <1-4094>
if-range no pvid
Command
108
Description
This command displays all of the VLAN
configurations.
This command displays the VLAN
configurations.
This command changes the node to configure
node.
This command enters the interface configure
node.
This command configures the acceptable frame
type.
all - acceptable all frame types.
tagged - acceptable tagged frame only.
untagged – acceptable untagged frame only.
This command configures a VLAN ID for the
port default VLAN ID.
This command configures 1 for the port default
VLAN ID.
This command enters the if-range configure node.
This command configures the acceptable frame
type.
all - acceptable all frame types.
tagged - acceptable tagged frame only.
untagged – acceptable untagged frame only.
This command configures a VLAN ID for the
port default VLAN ID.
This command configures 1 for the port default
VLAN ID.