Table of Contents
Advertisement
1. About this Guide
1.1. Welcome
The NGI-M08C4POE8-2 is a Managed Industrial PoE+ Switch perfectly suited for industrial
network applications which require managed devices that offer hassle-free fiber deployment and
an ideal solution to deploy in automation as well as surveillance systems. The switch is designed
to meet the requirements of both power and data transmission over single Ethernet cable to PoE
appliances and devices without the need for power outlets, eliminating additional cost of
components withstand in operating temperatures from -40℃ to 75℃ (-40°F to 167°F).
electrical cabling and circuits. The switch's rugged IP30 aluminum case and hardened
The NGI-M08C4POE8-2 features with 4 Gigabit SFP slots which is immune to moisture, static
electricity, power surges and short circuits, plus 8 10/100/1000Base-T PoE+ ports. Each of the
PoE ports complies with the IEEE 802.3at standard allowing them to supply up to 30W to satisfy
the growing demand of high power consuming network devices such as WLAN AP, VoIP phones
and IP surveillance cameras, and other powered devices in longer distances up to 100 m (328 ft.)
with Cat 5e cables.
1.1. Purpose
This guide discusses how to install and configure your Managed Industrial PoE+ Switch.
1.2. Terms/ Usage
In this guide, the term "Switch" (first letter upper case) refers to the NGI-M08C4POE8-2 Switch,
and "switch" (first letter lower case) refers to other switches.
15
Advertisement
Table of Contents
