Table of Contents
Advertisement
Parameter
ONVIF Settings
State
Tx Interval
Apply
Refresh
ONVIF Neighbor Information
Port
IP Address
MAC Address
VLAN ID
Product Name
Product Type
Model
Location
Web Service Address
Description
Select option to enable / disable the ONVIF feature on the
Switch.
Configures the sending ONVIF discovery packet interval.
Valid range is 6 ~ 3600 seconds.
Click Apply to take effect the settings.
Click Refresh to begin configuring this screen afresh.
The connected port of the ONVIF device.
The IP address of the ONVIF device.
The MAC address on the ONVIF device.
The VLAN ID of the ONVIF device join.
Name of the product added.
What kind of product that is added.
Model of the product.
Location where it is placed.
Address of the web service of that camera.
319
Advertisement
Table of Contents
