Web Browser; Network Factory Default Setting; Print The Printer Settings Page - Fuji Xerox DocuPrint 203A Quick Setup Manual

QSG_Eng.book Page 23 Tuesday, April 26, 2005 11:03 AM

Web browser

The print server is equipped with a web server that allows you to monitor its status or change
some of its configuration settings, using HTTP (Hyper Text Transfer Protocol).
The User Name is 'admin' and the default Password is 'access'. You can use the web browser to
change this password.
Network User's Guide Chapter 3.

Network Factory Default Setting

If you wish to reset the print server back to its default factory settings (including password),
please follow these steps:
1
Turn off the printer.
2
Make sure that the front cover is closed and the power cord is plugged in.
3
Hold down the Go button as you turn on the power switch. Keep the Go button pressed down until
the Toner, Drum and Paper LEDs light up. Release the Go button. Make sure that the Toner,
Drum and Paper LEDs are off.
4
Press the Go button six times. Make sure that all the LEDs light up when the print server has been
reset to its default factory settings.

Print the Printer Settings Page

The Printer Settings Page lists all the current printer settings, including network settings. To
print the Printer Settings Page, press the Go button three times.
23