Printer Environment Settings; Supported Operating Environments; Using The Printer As A Network Printer - Fuji Xerox DocuPrint 3105 User Manual

1

Printer Environment Settings

When you are finished installing your printer using the 'Setup Guide', go on to set up its
operating environment.
1.1

Supported Operating Environments

The printer can be used both as a local and a network printer. When used as a local printer,
the printer is connected directly to a computer. Connect the printer to a network for use as
a network printer.
Set all ports you want to use to [Enabled] on the control panel.
 Using the Printer as a Local Printer
When using the printer as a local printer, the printer and a computer can be connected using
the following methods:
• USB connection:
• Parallel connection: Connecting the printer and a computer using a parallel cable. To use
 Using the Printer as a Network Printer
When using the printer as a network printer, the printer can be set up in the following
environments:
• LPD
• Port9100
• NetWare
26
1 Printer Environment Settings
Internet
IPP
Network Connection
LPD/SMB/Port9100/EtherTalk/WSD*
Network Connection
NetWare/Windows Shared Printer
Server
Connecting the printer and a computer using a USB cable.
(default: [Enabled])
this feature, the Parallel Port Kit (optional) must be installed. (default:
[Disabled])
: Used when using TCP/IP protocol to enable direct communication
between the printer and a computer. (default: [Enabled])
: Used when using a Port9100 port.
(default: [Enabled])
®
: Used when sharing and managing the printer using a NetWare server.
(default: [Disabled])
*: WSD stands for Web Services on Devices.
Local Connection
Parallel/USB