Setting An Hdr Converter - Sony XVS-G1 User Manual

Note
Field frequency and frame frequency conversion is not
supported.
The signal formats that can be converted are given below.
System signal format
(frequency)
2160P 2SI
(59.94, 50)
1080P
(59.94, 50)
1080i
(59.94)
1080i
(50)
a) Only the first number output in each group of four outputs can be set. The
settings of the outputs in each group are linked and change accordingly.
1
Open the Home > Setup > System > Output > FC
Format menu (19101.44).
2
Select the target output to set.
To select and set multiple outputs, place a check mark
beside the target outputs to set.
To select and set all outputs, place a check mark in the
Select All checkbox.
3
Press the [FC Format] button and select an output
signal format from the pull-down list.
Adjusting the conversion method
The conversion method adjustment items and the target
conversion formats are given below.
Adjustment item Conversion format
Down-converter • 1080i t 480i
aspect ratio
• 1080i t 576i
1
Open the Home > Setup > System > Output > FC
Adjust menu (19101.45).
2
Select the target output to set.
To select and set multiple outputs, place a check mark
beside the target outputs to set.
To select and set all outputs, place a check mark in the
Select All checkbox.
3
Adjust the conversion method.
Signal format of output
signal
1080i
1080P
a)
2160P 2SI 3G
2160P 2SI 12G
720P
1080i
1080P
480i
720P
1080i
576i
720P
1080i
298
To set the down-converter aspect ratio
Press the [Aspect] button and select an aspect ratio from
the pull-down list.
Edge Crop: Crop the left and right sides of a 16:9 image
to convert it to a 4:3 image.
Letter Box: Add black bars on the top and bottom of a
16:9 image to convert it to a 4:3 image.
Squeeze: Compress a 16:9 image horizontally to covert it
to a 4:3 image.
Image before conversion
(16:9)
When [Edge Crop] is selected, press the [Position] button
and set the following parameter.
No. Parameter Adjustment
1 EC Position Image position
To return the conversion method settings to the
defaults
Press the [Default] button.

Setting an HDR Converter

You can set the output signal OETF, color space, and HDR
converter for outputs that have color corrector/HDR
converter enabled.
For details about each HDR conversion item, see "Setting
HDR" (page 288).
For details about outputs that can be configured with a
color corrector/HDR converter, see "Selecting Outputs
Configurable with a Color Corrector/HDR Converter"
(page 296).
Image after conversion (4:3)
Edge Crop
Letter Box
Squeeze