Saving A File - Sony XVS-G1 User Manual

The selected regions are displayed in white characters. The
reference region is displayed inverted.
Press the [Select] button in the [Region] group, select a
region in the [Select Region] window, and press [OK].
Effect timeline/snapshot region selection:
In the [Select Region] window, set the button for the
region to select to the on state.
Select a tab to change the region to display.
[ME] tab: Switcher bank regions
[User] tab: User regions
[DME] tab: DME regions
[External Device] tab: External device regions
To select all regions, set the [All Regions] button to the
on state.
Key snapshot region selection:
In the [Select Region] window, set the button for the
key to select to the on state.
To select all keys, set the [All Regions] button to the
on state.
Wipe snapshot/DME wipe snapshot region selection:
In the [Select Region] window, set the button for the
switcher bank to select to the on state.
To select all switcher banks, set the [All Regions]
button to the on state.
Note
The register names/file names of the reference region are
displayed in the register/file list.
The number of regions for which data is saved in a register/
file is displayed in [Item(s)].
A lock icon is displayed for a register when the register in
the selected region is locked.

Saving a File

Note
Files cannot be saved in a locked package.
1
Open the Home > File > Register > Effect Timeline >
Save menu (10104.12).
The name of the most recently loaded package and the
free space in storage are displayed at the top right.
2
Select a region.
The regions that can be selected vary depending on the
category.
For details, see "To select a region" (page 265).
Note
Selection of a region is not required in the shotbox,
macro, and macro attachment categories.
3
In the [Switcher] group list, select the target register to
save.
To select and save multiple registers, place a check
mark beside the target registers to save.
To select and save all registers, place a check mark in
the Select All checkbox.
You can also press the [Select Register(s)] button and
enter a register number in the numeric keypad
window.
Note
Selection of a register is not required in the macro
attachment category as there is only one register.
4
Press the [Select] button in the [Package] group.
The [Select Package] window appears.
5
Select a package and press [OK].
To create a new package
Press the [New Package] button to display the [New
Package] window.
Specify a package name, tags, and memo in the same
way as in [Edit Properties] window.
For details, see "Editing Package Properties"
(page 258).
To select the default package
Press the [Default Package] button.
6
In the [Package] group list, select a save destination
file.
When multiple files are selected, select the first save
destination file.
You can also press the [Select Destination] button and
enter a file number in the numeric keypad window.
The save destination of the first register selected in the
[Switcher] group is the first file selected in the
[Package] group, and the subsequent files in the
[Package] group in the same relative positions as the
selected registers in the [Switcher] group become save
destinations. The first file in the [Package] group is
shown in light blue, and the subsequent save
destination files are shown in blue gray.
Note
Selection of a file is not required in the macro
attachment category.
7
Press the [Save] button.
8
Check the message, then press [OK].
The files are saved in the selected package.
266