Executing A Macro; Executing A Macro (Flexi Pad Control Block) - Sony XVS-G1 User Manual

To select and rename all registers, place a check mark
in the Select All checkbox.
You can also press the [Select Register(s)] button and
enter a register number in the numeric keypad
window.
3
Press the [Register Name] button and enter a name (up
to 8 characters) using the keyboard.

Executing a Macro

You can execute a macro using the Flexi Pad control
block, utility control block, or cross-point control block.
On the utility control block and cross-point control block,
use buttons assigned with the macro register recall
function.
For details about assigning a function, see "Assigning a
Utility Function" (page 318).
Executing a Macro (Flexi Pad
Control Block)
You can recall a macro register and execute a macro on the
Flexi Pad control block in macro operation mode.
The macro execution operation varies depending on the
execution mode.
For details about the execution mode, see "Macro
execution mode" (page 238).
Notes
• Multi mode is disabled if a macro register is recalled
using the Flexi Pad control block. Only one macro can be
executed at a time.
For details about multi mode, see "Executing multiple
macros simultaneously (multi mode)" (page 238).
• If the same macro or another macro is recalled during
macro execution or when the macro is stopped, the
operation varies depending on the settings.
For details about settings, see "Setting the Macro
Mode" (page 328).
• Events registered in a macro are executed according to
the setup and the device configuration in force when the
events were registered. If the state has changed since
registration, the contents of the macro may not be
reproduced correctly when the macro is recalled.
• When executing a macro, if you switch to macro edit
mode, the macro currently being executed stops.
• A macro cannot be executed while creating/editing a
macro.
Executing a macro in normal execution
mode
1
Press the [MCRO] button.
The [MCRO] button is lit amber, and the memory
recall section switches to macro operation mode.
2
Select a bank.
248