Setting A Color Corrector - Sony XVS-G1 User Manual

To set the I/P converter conversion mode
Press the [Conversion] button and select a conversion
mode from the pull-down list.
Frame: Conversion in frame units
Field: Conversion in field units
Adaptive Y: Detects motion in the luminance signal, and
automatically switches mode between conversion in
frame units and field units.
Adaptive Y/C: Detects motion in the luminance signal
and chrominance signal, and automatically switches
mode between conversion in frame units and field
units.
When [Adaptive Y] or [Adaptive Y/C] is selected, press
the [Motion] button and enter a detection sensitivity (1 to
4) in the numeric keypad window.
1: Highest proportion converted from frames (still image
priority mode).
2: Higher proportion converted from frames.
3: Higher proportion converted from fields.
4: Highest proportion converted from fields (motion
priority mode)
To set the up-converter aspect ratio
Press the [Aspect] button and select an aspect ratio from
the pull-down list.
Edge Crop: Add black bars on the left and right sides of a
4:3 image to convert it to a 16:9 image.
Letter Box: Crop the top and bottom of a 4:3 image to
convert it to a 16:9 image.
Squeeze: Stretch a 4:3 image horizontally to covert it to a
16:9 image.
Image before conversion
(4:3)
When [Edge Crop] is selected, press the [Position] button
and set the following parameter.
No. Parameter Adjustment
1 EC Position Image position
When [Letter Box] is selected, press the [Position] button
and set the following parameter.
Image after conversion (16:9)
Edge Crop
Letter Box
Squeeze
No. Parameter
1 LB Position
To return the conversion method settings to the
defaults
Press the [Default] button.

Setting a Color Corrector

You can set the following color corrector functions for
inputs that have color corrector/HDR converter enabled.
• Primary color correction
• RGB clip
For details about inputs that can be configured with a
color corrector/HDR converter, see "Selecting Inputs
Configurable with a Color Corrector/HDR Converter"
(page 290).
Note
When the system signal format is 1080P or 1080i, a color
corrector cannot be used.
1
Open the Home > Setup > System > Input > Input CCR
menu (19101.34).
2
Select the target input to set.
3
Set the [CCR] button in the [CCR] group to the on
state.
To disable a color corrector, set the [CCR] button to
the off state.
To return color corrector settings to the defaults
Press the [Unity] button in the [CCR] group, check the
message, then press [OK].
To set primary color correction
Set the [Primary CCR] button in the [Primary CCR] group
to the on state and set the parameters.
For details about setting primary color correction, see
"Setting primary color correction" (page 186).
To set the RGB clip function
Set the [RGB Clip] button in the [RGB Clip] group to the
on state and set the parameters.
For details about setting the RGB clip function, see
"Setting RGB clip" (page 187).
292
Adjustment
Image position