Setting A Roll - Sony XVS-G1 User Manual

When the [Flat] button is selected, set the following
parameters.
No. Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Hue Hue
When the [Hue Rotation] button is selected, set the
following parameters.
No. Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Speed Speed at which the hue changes
Note
To set a 2nd channel signal, a DME channel for the second
channel must be selected beforehand.
For details about selecting a DME channel, see "DME
Effects for Keys" (page 86).

Setting a Roll

In the Home > DME > Channel1 > Non Linear > Effect
List menu (15101.51), press the [Roll] button to display
the Home > DME > Channel1 > Non Linear > Roll menu
(15101.53).
In the Home > DME > Channel1 > Non Linear > Roll
menu (15101.53), set the [Roll] button to the on state and
set the following parameters.
No. Parameter Adjustment
1 Radius Radius of the rolled portion
2 Offset Amount of roll
3 Angle Angle of roll
To split an image
In the [Split Mode] group, select a type of split.
H&V: Split horizontally and vertically (top, bottom, left,
right)
H: Split horizontally (left, right)
V: Split vertically (top, bottom)
To select a signal to insert on the back side of the
roll
In the [Back Video] group, select a signal.
Self: Same signal as the front side
Flat: Single color
Hue Rotation: Gradually varying hue
2nd Channel: 2nd channel signal
When the [Flat] button is selected, set the following
parameters.
No. Parameter
1 Luminance
2 Saturation
3 Hue
When the [Hue Rotation] button is selected, set the
following parameters.
No. Parameter
1 Luminance
2 Saturation
3 Speed
Note
To set a 2nd channel signal, a DME channel for the second
channel must be selected beforehand.
For details about selecting a DME channel, see "DME
Effects for Keys" (page 86).
158
Adjustment
Luminance
Saturation
Hue
Adjustment
Luminance
Saturation
Speed at which the hue changes