Resizer; Overview; Two-Dimensional Transforms On Keys - Sony XVS-G1 User Manual

Resizer

A resizer is used to set a two-dimensional transform or
effect on a key.
This section describes an example setting a resizer on key
1 on M/E-1.

Overview

A resizer is used to set a two-dimensional transform
(move, enlarge/reduce, rotate) or border/crop on a key.
It can also add the following resizer effects to a key.
• Wide key border
• Drop shadow
• Edge enhance
• Mosaic
• Defocus
• Mask
• Rotation
The resizer is configured using the menu.
Two-dimensional transform and crop/border settings are
configured using the device control block.
Dual resizer effects
Two resizers must be used for the following resizer effects.
Effects that use two resizers are called "dual resizer
effects."
• Wide key border
• Drop shadow
• Mask
In a dual resizer effect, key combinations of key 1 and key
2, key 3 and key 4, key 5 and key 6, key 7 and key 8 are
used.
When a dual resizer effect is set on either of the two keys,
the other key cannot be used for a resizer, DME wipe, or
resizer DME wipe.
Restrictions on resizers
• The image on the key with the resizer applied has a one-
frame delay.
• Resizer effects may differ from DME effects.
• Keys with a resizer enabled cannot be used for a DME
(processed key), DME wipe, or resizer DME wipe.
• The following resizer effects cannot be enabled
simultaneously on a single key.
- Mosaic and edge enhance
- Defocus and wide key border
- Mask and drop shadow
- Mask and wide key border
Two-Dimensional Transforms on
Keys
Reducing, enlarging, moving, and rotating
keys (menu)
1
Open the Home > M/E-1 > Key1 > Resizer/Proc Key
> Resizer Adjust/DME Select menu (11101.41).
2
Set the [Resizer] button to the on state and set the
following parameters.
No. Parameter
1-1 Location X
1-2 Location Y
1-3 Size
1-4 Rotation X
Rotation Y
1-5 Perspective
2-1 Aspect X
2-2 Aspect Y
2-3 Aspect Ratio
a) When the [X] button is selected in the [Rotation] group
b) When the [Y] button is selected in the [Rotation] group
Reducing, enlarging, moving, and rotating
keys (device control block)
Switch the device control block to resizer operation mode
to operate a two-dimensional transform.
1
Press the [M/E 1] button.
The [M/E 1] button is lit green, and the device control
block switches to M/E-1 resizer operation mode.
You can select multiple switcher banks. The first
selected button becomes the reference channel, and is
lit green. Subsequent selected buttons are lit amber.
2
Press the [K1RSZ] button.
The [K1RSZ] button is lit green, and key 1 becomes
the target of resizer operations.
You can select multiple keys. The first selected button
becomes the reference channel, and is lit green.
Subsequent selected buttons are lit amber.
3
Press the [RSZR ON] button.
89
Adjustment
Movement in horizontal
direction
Movement in vertical direction
Size of key
a)
Rotation around X-axis
b)
Rotation around Y-axis
Viewpoint position
(perspective)
Aspect ratio in horizontal
direction
Aspect ratio in vertical
direction
Simultaneous adjustment of
aspect ratio in horizontal
direction and vertical direction