Setting A Color Corrector; Setting An Hdr Converter - Sony MLS-X1 User Manual

Frame: Conversion in frame units
Field: Conversion in field units
Adaptive: Detects motion in the signal, and
automatically switches mode between conversion in
frame units and field units.
When [Adaptive] is selected, press the [Motion] button
and enter a detection sensitivity (1 to 4) in the numeric
keypad window.
1: Highest proportion converted from frames (still image
priority mode).
2: Higher proportion converted from frames.
3: Higher proportion converted from fields.
4: Highest proportion converted from fields (motion
priority mode).
To set the I/P converter conversion mode
Press the [Conversion] button and select a conversion
mode from the pull-down list.
Frame: Conversion in frame units
Field: Conversion in field units
Adaptive Y: Detects motion in the luminance signal, and
automatically switches mode between conversion in
frame units and field units.
Adaptive Y/C: Detects motion in the luminance signal
and chrominance signal, and automatically switches
mode between conversion in frame units and field
units.
When [Adaptive Y] or [Adaptive Y/C] is selected, press
the [Motion] button and enter a detection sensitivity (1 to
4) in the numeric keypad window.
1: Highest proportion converted from frames (still image
priority mode).
2: Higher proportion converted from frames.
3: Higher proportion converted from fields.
4: Highest proportion converted from fields (motion
priority mode).
To return the conversion method settings to the
defaults
Press the [Default] button.

Setting a Color Corrector

You can set the following color corrector functions for
inputs that have color corrector/HDR converter enabled.
• Primary color correction
• RGB clip
For details about inputs that can be configured with a
color corrector/HDR converter, see "Selecting Inputs
Configurable with a Color Corrector/HDR Converter"
(page 368).
1
Open the Home > Setup > System > Input > Input
CCR menu (19101.34).
2
Select the target input to set.
3
Set the [CCR] button in the [CCR] group to the on
state.
To disable a color corrector, set the [CCR] button to
the off state.
To return color corrector settings to the defaults
Press the [Unity] button in the [CCR] group, check the
message, then press [OK].
To set primary color correction
Set the [Primary CCR] button in the [Primary CCR]
group to the on state and set the parameters.
For details about setting primary color correction, see
"Setting primary color correction" (page 241).
To set the RGB clip function
Set the [RGB Clip] button in the [RGB Clip] group to the
on state and set the parameters.
For details about setting the RGB clip function, see
"Setting RGB clip" (page 242).

Setting an HDR Converter

You can set the input signal OETF, color space, and HDR
converter for inputs that have color corrector/HDR
converter enabled.
For details about each HDR conversion item, see
"Setting HDR" (page 366).
For details about inputs that can be configured with a
color corrector/HDR converter, see "Selecting Inputs
Configurable with a Color Corrector/HDR Converter"
(page 368).
Note
To use the HDR converter function, the MZS-X1750
HDR Converter License (option) is required for each
target box.
1
Open the Home > Setup > System > Input > HDR
Converter menu (19101.35).
The system OETF, color space, and HDR settings are
displayed in [System Settings].
2
Select the target input to set.
To select and set multiple inputs, place a check mark
beside the target inputs to set.
To select and set all inputs, place a check mark in the
Select All checkbox.
370