Setting The Input Signal; Setting A Source Name; Selecting Inputs Configurable With A Color Corrector/Hdr Converter; Setting A Frame Delay - Sony XVS-G1 User Manual

Setting the Input Signal

This section describes how to set the switcher input signal.
The number of inputs will vary depending on the system
signal format.
2160P format:
Inputs: Max. 24
Inputs configurable with color corrector/HDR
converter: Max. 6
Inputs configurable with format converter: 12 (odd-
numbered inputs only)
1080P, 1080i formats:
Inputs: Max. 44
Inputs configurable with format converter: 24 (inputs
1 to 24 only)
Notes
• Inputs 25 to 36 can be used when an XKS-G1110
Additional I/O Board (option) is installed.
Inputs 37 to 44 can be used when two XKS-G1110
Additional I/O Boards (option) are installed.
• When the system signal format is 1080P or 1080i, a color
corrector/HDR converter cannot be used.
• Inputs 45 to 48 cannot be used. All settings are disabled.

Setting a Source Name

You can set the source name of an input signal.
1
Open the Home > Setup > System > Input > Input
Adjust menu (19101.31).
2
Select the target input to set.
To select and set multiple inputs, place a check mark
beside the target inputs to set.
To select and set all inputs, place a check mark in the
Select All checkbox.
3
Press the [Source Name] button and enter a source
name (up to 16 characters) using the keyboard.
Note
When multiple inputs are selected, consecutively
numbered source names are set.
For details, see "Name settings when multiple items
are selected" (page 43).
Selecting Inputs Configurable with a
Color Corrector/HDR Converter
You can set inputs that can be configured with a color
corrector/HDR converter.
Notes
• Configurable only when the system signal format is
2160P.
• Up to six inputs can be configured with a color corrector/
HDR converter.
1
Open the Home > Setup > System > Input > Input
Adjust menu (19101.31).
2
Select the target input to set.
To select and set multiple inputs, place a check mark
beside the target inputs to set.
3
Set the [CCR/HDR] switch to the on state.
Note
If the maximum number of inputs that can be
configured has been reached, set the [CCR/HDR]
switch for one of the inputs to the off state and then
configure the inputs.

Setting a Frame Delay

1
Open the Home > Setup > System > Input > Input
Adjust menu (19101.31).
2
Select the target input to set.
To select and set multiple inputs, place a check mark
beside the target inputs to set.
To select and set all inputs, place a check mark in the
Select All checkbox.
3
Set the [Frame Delay] switch to the on state.
To disable a frame delay, set the [Frame Delay] switch
to the off state.
4
Press the button on the right of the [Frame Delay]
switch and enter a delay value in the numeric keypad
window.
The delay value that can be set will vary depending on
the signal format of the input signal.
2160P, 1080P, 720P: 1 to 11 frames
1080i, 576i, 480i: 1 to 4 frames
290