Sony XVS-G1 User Manual page 114

Pattern group Execution
mode
Defocus 1ch
Crop Slide 2ch
Brick 2ch
3ch
Resizer Slide 1ch
Resizer 1ch
Squeeze
Resizer 1ch
Frame I/O
a) Transition with a background selected for a next transition
b) Transition with a key selected for a next transition or an independent key
transition
DME wipe pattern modifiers
You can add various modifiers to a DME wipe pattern,
such as setting the DME wipe direction and pattern
position.
Pattern limit
You can specify the transition execution limit of a DME
wipe.
For details, see "Pattern Limit" (page 63).
Note
In an independent key transition, a pattern limit cannot be
used.
DME wipe restrictions
Relationship with processed keys
• In DME wipes and processed keys, only enabled DME
channels on the switcher bank can be used.
When using a DME in a processed key, an available
DME channel is automatically assigned for DME wipes.
If all DME channels are in use, then a DME wipe cannot
be used.
For details about setting DME channels, see "Setting a
DME channel to use in a switcher bank" (page 309).
• DME wipes and resizer DME wipes cannot be used on
keys that use a DME in a processed key.
Relationship with the image effect function
It is not possible to use background DME wipes when the
image effect function is set.
Relationship with resizers
• DME wipes and resizer DME wipes cannot be used on
keys with a resizer enabled.
Pattern Background Keys
a) b)
number
1702 a ×
2661, 2662 a ×
2801 to a ×
2804, 2811
to 2814
3601 a ×
7001 to × a
7008
7021 to × a
7031
a
7201 to ×
7208, 7221
to 7224
• When a dual resizer effect is set on either of the two
keys, DME wipes and resizer DME wipes cannot be
used on the other key.
Number of DME channels that can be used
simultaneously
DMEs can be used in up to two locations simultaneously
on a single switcher bank (processed key with DME wipe).
The number of DME channels that can be used on a key
depends on the DME wipe pattern execution mode, as
given below.
When not using a DME wipe:
One DME channel each on two keys, or one to four
DME channels on a single key can be used.
When using a 1-channel mode DME wipe:
One DME channel on a single key only can be used.
When using a 2-channel mode or 3-channel mode DME
wipe:
DMEs cannot be used on keys.
Notes
• In multi program 2 mode, DMEs can be used in up to two
locations (main and sub).
• When M/E split is enabled, DMEs can be used in one
location each on two sub blocks.
114