Enabling/Disabling A Network Aux Remote Panel; Configuring A Remote Panel - Sony XVS-G1 User Manual

For details about connection, refer to the ICP-X1224/
X1124/X1216/X1116 Installation Manual.
Enabling/Disabling a Network AUX
Remote Panel
1
Open the System Configuration > Configuration >
Aux Remote Panel > Common Settings menu
(20101.21).
2
Enable/disable using the [Aux Remote Interface]
button.
On: Enable the network AUX remote panel function.
Off: Disable the network AUX remote panel function.

Configuring a Remote Panel

You can select and set a remote panel from the list of
remote panels connected to the network.
Setting the control panel to connect
1
Open the System Configuration > Configuration >
Aux Remote Panel > Assign menu (20101.22).
The remote panel name, IP address of the remote
panel, and the connected control panels are displayed.
You can press the [v] button/[V] button for [Name] to
sort the display of remote panels.
2
Select the target remote panel to set.
To select and set multiple remote panels, place a check
mark beside the target remote panels to set.
To select and set all remote panels, place a check mark
in the Select All checkbox.
3
In the [Panel] group, select a control panel to connect.
Panel 1: Control panel 1
Panel 2: Control panel 2
No Assign: Not assigned
4
Press the [Apply] button in the [Assign] group.
To return to the previous setting
Press the [Clear] button in the [Assign] group.
5
Check the message, then press [OK].
Note
All the connected remote panels are rebooted.
To display the latest status
Press [Refresh].
Deleting a remote panel from the list
You can delete a remote panel from the list of remote
panels.
Note
Remote panels connected to a control panel cannot be
deleted.
1
Open the System Configuration > Configuration >
Aux Remote Panel > Delete menu (20101.23).
The remote panel name and IP address of the remote
panels are displayed.
You can press the [v] button/[V] button for [Name] to
sort the display of remote panels.
2
Select the target remote panel to delete.
To select and delete multiple remote panels, place a
check mark beside the target remote panels to delete.
To select and delete all remote panels, place a check
mark in the Select All checkbox.
3
Press the [Delete] button.
4
Check the message, then press [OK].
To display the latest status
Press [Refresh].
355