Sony XVS-G1 User Manual page 247

To select and copy multiple registers, place a check
mark beside the target registers to copy.
To select and copy all registers, place a check mark in
the Select All checkbox.
You can also press the [Select Register(s)] button and
enter a register number in the numeric keypad
window.
3
In the list on the right, select a copy destination
register.
When multiple registers are selected, select the first
copy destination register.
You can also press the [Select Destination] button and
enter a register number in the numeric keypad
window.
The copy destination of the first register selected on
the left is the first register selected on the right, and the
subsequent registers on the right in the same relative
positions as the selected registers on the left become
copy destinations. The first register on the right is
shown in light blue, and the subsequent copy
destination registers are shown in blue gray.
4
Press the [Copy] button.
5
Check the message, then press [OK].
To copy without renaming a destination register
Set the [w/o Name] button to the on state.
Moving a register
Notes
• An empty register cannot be moved.
• A locked register cannot be moved.
Select a move source register and move destination
register in the same way as for copying a register and press
the [Move] button.
For details, see "Copying a register" (page 246).
To move without renaming a destination register
Set the [w/o Name] button to the on state.
Swapping registers
Select the registers to swap in the same way as for copying
a register and press the [Swap] button.
For details, see "Copying a register" (page 246).
To swap without renaming the registers
Set the [w/o Name] button to the on state.
Locking a register
1
Open the Home > Register > Macro > Edit Register >
Browse menu (18307.21).
2
Select the target register to lock.
To select and lock multiple registers, place a check
mark beside the target registers to lock.
To select and lock all registers, place a check mark in
the Select All checkbox.
You can also press the [Select Register(s)] button and
enter a register number in the numeric keypad
window.
3
Press the [Lock] button.
To release the lock
Select the target register to unlock and press the [Unlock]
button.
Deleting a register
Note
A locked register cannot be deleted.
1
Open the Home > Register > Macro > Edit Register >
Browse menu (18307.21).
2
Select the target register to delete.
To select and delete multiple registers, place a check
mark beside the target registers to delete.
To select and delete all registers, place a check mark in
the Select All checkbox.
You can also press the [Select Register(s)] button and
enter a register number in the numeric keypad
window.
3
Press the [Delete] button.
4
Check the message, then press [OK].
Renaming a register
Note
A locked register cannot be renamed.
1
Open the Home > Register > Macro > Edit Register >
Browse menu (18307.21).
2
Select the target register to rename.
To select and rename multiple registers, place a check
mark beside the target registers to rename.
247