Batch File Operations; Loading Files; Saving Files; Copying Files - Sony XVS-G1 User Manual

Batch File Operations

You can select multiple categories and perform batch
operations on setup data and register data files.

Loading Files

Note
Files in categories where loading is locked cannot be
loaded.
1
Open the Home > File > All > Load/Save > Load menu
(10102.11).
The name of the most recently loaded package and the
free space in storage are displayed at the top right.
2
Press the [Select] button in the [Package] group.
The [Select Package] window appears.
3
Select a package and press [OK].
To select the default package
Press the [Default Package] button.
4
Select the target category to load.
To select a setup data category, select a button in the
[Setup] group.
To select a register data category, select a button in the
[Register] group.
To select all categories, set the [All Categories] button
to the on state.
Note
The categories saved in the selected package are
displayed in white characters in the [Package] group
category display area.
The files in the categories included in the selected
package become the target for loading.
5
Press the [Load] button.
6
Check the message, then press [OK].
The files in the selected categories are loaded.
To delete register data before loading files
You can delete all current register data when loading
register data.
Set the [Clear Regis. Before Load] button in the [Switcher]
group to the on state.

Saving Files

Note
Files cannot be saved in a locked package.
1
Open the Home > File > All > Load/Save > Save menu
(10102.12).
The name of the most recently loaded package and the
free space in storage are displayed at the top right.
2
Press the [Select] button in the [Package] group.
The [Select Package] window appears.
3
Select a package and press [OK].
To create a new package
Press the [New Package] button to display the [New
Package] window.
Specify a package name, tags, and memo in the same
way as in [Edit Properties] window.
For details, see "Editing Package Properties"
(page 258).
To select the default package
Press the [Default Package] button.
If there is no default package, a new default package is
created.
4
Select the target category to save.
To select a setup data category, select a button in the
[Setup] group.
To select a register data category, select a button in the
[Register] group.
To select all categories, set the [All Categories] button
to the on state.
5
Press the [Save] button.
6
Check the message, then press [OK].
The files in the selected categories are saved in the
package.
Note
If the selected package already contains the same
categories, the files will be overwritten.

Copying Files

You can copy files in each category between packages.
260