Assigning A Utility Function; Setting An Action - Sony XVS-G1 User Manual

Assigning a Utility
Function
You can assign the following functions (actions) to the
memory recall buttons in the utility control block and the
cross-point buttons in the cross-point control block.
• Utility command
• Recalling a macro register
• Recalling a shotbox register
• Menu shortcut

Setting an Action

Assigning a utility command
You can assign a utility command function to a button.
You can set the name to display on the memory recall
buttons in the utility control block and on the display in the
cross-point control block.
1
Open the Home > Setup > Panel > Module > Utility
Function Assign menu (19104.22).
2
Display the target control block to set.
Select a tab to change the control block to display.
[Utility Module] tab: Utility control block
[XPT Module] tab: Cross-point control block
3
Select the target button to set.
The target button to set is displayed in "bank number-
button number" format.
To select and set multiple buttons, place a check mark
beside the target buttons to set.
To select and set all buttons, place a check mark in the
Select All checkbox.
4
Press the [Action Group] button and select [Util
Command] from the pull-down list.
5
Press the [Edit] button for [Action].
The [Select Action] window appears.
6
Set the button for the command to assign to the on
state.
Select a tab to change the action to display.
[Safe Title] tab: Safe title setup commands
[GPI Test Fire] tab: GPI trigger test output
commands
[Others] tab: Other commands
7
Press [OK].
To set a name
Press the [Name] button and enter a name (up to 8
characters) using the keyboard.
When multiple buttons are selected, consecutively
numbered names are set.
For details, see "Name settings when multiple items are
selected" (page 43).
To release the assignment
Select the target button to release and press the [Clear]
button.
Assigning a macro register/shotbox
register
You can assign a macro register or shotbox register recall
function to a button.
1
Open the Home > Setup > Panel > Module > Utility
Function Assign menu (19104.22).
2
Display the target control block to set.
Select a tab to change the control block to display.
[Utility Module] tab: Utility control block
[XPT Module] tab: Cross-point control block
3
Select the target button to set.
The target button to set is displayed in "bank number-
button number" format.
To select and set multiple buttons, place a check mark
beside the target buttons to set.
To select and set all buttons, place a check mark in the
Select All checkbox.
4
Press the [Action Group] button and select [Macro
Recall] or [Shotbox Recall] from the pull-down list.
5
Press the [Edit] button for [Action] and enter a register
number to assign in the numeric keypad window.
To release the assignment
Select the target button to release and press the [Clear]
button.
Assigning a menu shortcut
You can assign a menu shortcut function to a button.
You can set the name to display on the memory recall
buttons in the utility control block and on the display in the
cross-point control block.
318