Chapter 16 Snapshots; Overview; Attributes - Sony XVS-G1 User Manual

Snapshots

Overview

A snapshot is a function that saves the configured status for
applying an effect to an image in a register which can be
used to reproduce the same state. You can save a snapshot
in a register and then recall it as required.
Snapshot registers
You can create a snapshot for the following regions.
Switcher bank regions:
M/E-1 to M/E-5, P/P, M/E-1 Sub to M/E-5 Sub, P/P
Sub
User regions:
User 1 to User 8
DME regions:
DME 1 to DME 4 (including Global)
External device regions:
Router
There are 99 snapshot registers for each region.
Snapshots for function targets
In addition to snapshots for region targets, there are also
snapshots for specific function targets.
Key snapshot: Snapshot of settings on each key.
For details, see "Key Snapshots" (page 96).
Wipe snapshot: Snapshot of wipe settings on each switcher
bank.
For details, see "Wipe Snapshots" (page 110).
DME wipe snapshot: Snapshot of DME wipe settings of
each switcher bank.
For details, see "DME Wipe Snapshots" (page 122).

Attributes

You can add specific attributes for running a snapshot
when it is recalled.
You set attributes for a snapshot register.
Chapter
Attribute types
You can add the following attributes.
Cross-point hold: When the snapshot is recalled, the cross-
point selection information remains unchanged.
Auto transition: An auto transition starts simultaneously
after a snapshot is recalled.
Effect dissolve: The image changes smoothly from the
state before the snapshot is recalled to the snapshot
state.
Auto play: Plays video content immediately after the
snapshot is recalled.
Cross-point hold (DME): Sets cross-point hold for a DME
region.
Notes
• Cross-point hold operation mode is applied to key bus
cross-point hold attributes.
For details, see "Setting the Cross-Point Hold
Operation Mode" (page 313).
• If both effect dissolve and auto transition are configured,
the auto transition takes precedence.
Configurable attributes
The attributes that can be configured vary depending on
the region.
a: Available
×: Not available
Attributes Switcher
bank
regions
Cross-point
hold
Auto transition
Effect dissolve
Auto play
Cross-point
hold (DME)
a) Aux 1 to Aux 48 regions only
b) Color Bkgd 1, Color Bkgd 2, Aux 1 to Aux 48 regions only
c) Frame Memory 1 to Frame Memory 16, Clip Player 1 to Clip Player 4
regions only
215
16
User DME
regions regions
a)
a a
×
a × ×
b)
a a a
c)
× a ×
× × a
External
device
regions
a
×
×
×
×