Assigning Signals; Displaying A Signal Name - Sony XVS-G1 User Manual

Assigning Signals

Note
The following output signal settings are not reflected on
the multi viewer screen.
Safe title, AUX bus color corrector, AUX mix
1
Open the Home > Setup > Switcher > Multi Viewer
menu (19103.21).
2
Display the target multi viewer to set.
Select a tab to change the multi viewer to display.
[MV1] tab: Multi viewer 1
[MV2] tab: Multi viewer 2
3
Press the button for the target subscreen to set.
The [Select Displayed Signal] window appears.
4
Set the button for the target signal to the on state.
Select a tab to change the type of signal to display.
[PP/ME Out] tab: Switcher bank output signals
[FM/Clip/DME] tab: Frame memory, clip player,
and DME monitor output signals
[Aux] tab: AUX, edit preview, preset output signals
[Input] tab: Input signals
Note
Input signals 45 to 48 cannot be used.
5
Press [OK].

Displaying a Signal Name

You can display the name of a signal assigned to a
subscreen.
1
Open the Home > Setup > Switcher > Multi Viewer
menu (19103.21).
2
Display the target multi viewer to set.
Select a tab to change the multi viewer to display.
[MV1] tab: Multi viewer 1
[MV2] tab: Multi viewer 2
3
Press [•••] (overflow button) on the right of the target
subscreen to set.
The [Select Displayed Information] window appears.
4
Place a check mark in [Name].
To not display a signal name, clear the check mark.
To display the signal names of all subscreens
Set the [Enable All Names] button to the on state.
310