Setting A Tcp/Ip Connected Device - Sony XVS-G1 User Manual

Zero based: Timecode sense (detection), taking the
first frame of the loaded file as 00:00:00:00.
SOM based: Sense (detection) occurs using the
timecode recorded in the loaded file.
6
In the list on the right, set the video port and response
speed of the item.
Press the [Setting] button for an item to set and enter a
setting in the numeric keypad window.
Item Item description
Video Port Number of the video port associated
with the target port to set
Maximum Maximum time required to open a file
Open Delay
Maximum Maximum time required to cueup a file
Cueup Delay
Play After Delay time after cueup until playback
Cueup Delay starts
Stop Delay Delay time from issuing the Stop
command until playback stops
Still Delay Delay time from issuing the Still
command until playback stops
Command Delay time from issuing the Auto Mode
Delay (Auto On/Off command until the command
Mode) takes effect
Command Delay time from issuing the Out Preset
Delay (Out command until the command takes
Preset) effect
Command Delay time from issuing the Preview In
Delay (Preview Preset command until the command
In Preset) takes effect
Internal Reserved for future use.
Parameter (1) Set the value to "255".
to (3)

Setting a TCP/IP Connected Device

1
Open the Home > Setup > External Device > Serial/
Net Port Setting > General TCP/IP menu (19105.66).
A list of ports is shown on the left and the settings
status of the selected port is shown on the right.
2
In the list on the left, select the target port to set.
3
Press the [IP Address] button and enter an IP address
using the keyboard.
4
Press the [TCP/IP Port] button and enter a port number
in the numeric keypad window.
5
In the list on the right, set the value of the item.
Press the [Setting] button for an item to set and enter a
setting in the numeric keypad window.
Item
Internal
Parameter (1)
to (10)
338
Item description
Reserved for future use.
Set the value to "255".