Sony XVS-G1 User Manual page 107

No. Parameter
3 Speed
4 Shape
a) 1: Sine wave, 2: Triangle wave, 3: Square wave
Warping the edges of a wipe pattern
(Spring)
This warps the edges of a pattern inward or outward.
Spring disabled
1
Open the Home > M/E-1 > Bus/Transition > Wipe >
Main Modify menu (11109.35).
2
Set the [Spring] button to the on state and set the
following parameter.
No. Parameter
1 Width
Adding a spiral effect to a wipe pattern
(Spiral)
This transforms the pattern into a spiral pattern.
Spiral disabled
1
Open the Home > M/E-1 > Bus/Transition > Wipe >
Main Modify menu (11109.35).
Adjustment
Speed of ripples
• Negative values create
waves in the down, left, and
counterclockwise directions.
• Positive values create waves
in the up, right, and
clockwise directions.
a)
Modulation waveform
Spring enabled
Adjustment
Size and direction of the warp
• A value of –100.00
corresponds to maximum
inward warpage.
• A value of +100.00
corresponds to maximum
outward warpage.
Spiral enabled
2
Set the [Spiral] button to the on state and set the
following parameters.
No. Parameter
1 Magnitude
2 Wave Speed
107
Adjustment
Size and direction of the spiral
• A value of –100.00
represents the maximum
movement in the
counterclockwise direction.
• A value of +100.00
represents the maximum
movement in the clockwise
direction.
Speed of the lateral waves
• Negative values set the
speed from the left.
• Positive values set the
speed from the right.