Dme Override - Sony XVS-G1 User Manual

Copy target Using buttons
Keys [KEY1] button to [KEY8] button in key
operation mode on the Flexi Pad control
block
Wipes [WIPE] button in the Flexi Pad control
block
DME wipes [DME WIPE] button in the Flexi Pad
control block
To copy using control panel buttons, press and hold the
copy source button and press the copy destination button.
Example:
Copying a wipe
Press and hold the [WIPE] button in the Flexi Pad control
block of the copy source switcher bank, and press the
[WIPE] button in the Flexi Pad control block of the copy
destination switcher bank.

DME Override

When DME override is enabled and an effect timeline or
snapshot is recalled, the DME channel that was used when
saving can be forcibly selected.
Note
If effects that use the same DME channel are recalled
simultaneously in two or more regions, the DME channel
is selected in the following order of priority.
P/P > P/P Sub > M/E-1 > M/E-1 Sub > M/E-2 > M/E-2 Sub
> M/E-3 > M/E-3 Sub > M/E-4 > M/E-4 Sub > M/E-5 >
M/E-5 Sub
1
Open the Home > Utility > DME Override menu
(18201.41).
2
Enable/disable the function using the [DME Override]
button in the [DME Override] group.
On: Enable DME override.
Off: Disable DME override.
To disable DME channel selection while on-air
Set the [On Air Protect] button in the [DME Override]
group to the on state.
When DME override is enabled, the DME channel being
used on the switcher bank which is currently on-air will not
be forcibly selected.
194