Sony XVS-G1 User Manual page 109

No. Parameter
1 Angle
When the [Speed] button is selected, set the following
parameter.
No. Parameter
1 Speed
When the [Magnitude] button is selected, set the
following parameters.
No. Parameter
1 Angle
2 Magnitude
Setting the aspect ratio of a wipe pattern
(Aspect)
You can change the aspect ratio of a pattern.
1
Open the Home > M/E-1 > Key1 > Transition > Wipe
menu (11101.52).
Adjustment
Inclination angle of pattern
• A value of –100.00
corresponds to a rotation of
one turn counterclockwise.
• A value of +100.00
corresponds to a rotation of
one turn clockwise.
• A value of 0.00 corresponds
to no rotation.
Adjustment
Rotation speed of pattern
• A value of –100.00
corresponds to 1 revolution/
second counterclockwise
rotation.
• A value of +100.00
corresponds to 1 revolution/
second clockwise rotation.
• A value of 0.00 corresponds
to no rotation (stationary).
Adjustment
Angle of pattern at start of
transition
• A value of –100.00
corresponds to a rotation of
one turn counterclockwise.
• A value of +100.00
corresponds to a rotation of
one turn clockwise.
• A value of 0.00 corresponds
to no rotation.
Angle of rotation through
course of transition
• A value of –200.00
corresponds to a rotation of
two turns counterclockwise.
• A value of +200.00
corresponds to a rotation of
two turns clockwise.
• A value of 0.00 corresponds
to no rotation.
2
Set the [Aspect] button to the on state and set the
following parameter.
No. Parameter
1 Aspect
Replicating a wipe pattern (Multi)
You can replicate a pattern horizontally, vertically, or both
up to 63 times.
You can select from four types of pattern layout in an
independent key transition.
1: All patterns in the same orientation
2: Even-numbered rows moved horizontally
3: Even-numbered columns flipped horizontally, even-
numbered rows flipped vertically
4: Even-numbered columns flipped horizontally, even-
numbered rows flipped vertically and moved
horizontally
1
Open the Home > M/E-1 > Key1 > Transition > Wipe
menu (11101.52).
2
Set the [Multi] button to the on state and set the
following parameters.
No. Parameter
1 H Multi
2 V Multi
3 Invert Type
109
Adjustment
Aspect ratio
• Negative values expand
vertically.
• Positive values expand
horizontally.
Adjustment
Number of repetitions of
pattern horizontally
Number of repetitions of
pattern vertically
Pattern layout (1 to 4)