Sony XVS-G1 User Manual page 113

Pattern group Description
P in P (Picture-in- In 1-channel mode:
picture) Completed in two transitions.
In the first transition, the current
image shrinks, and the new image
appears behind it. In the second
transition, the current image expands
to its original size.
In 2-channel mode:
In the first half of the transition, the
current image shrinks and the new
image appears behind it. In the
second half of the transition, the new
image expands, and the current
image disappears.
You can move the pattern from the
current position by a relative amount.
During the transition, the signal from
the utility 2 bus appears as the
background.
Mosaic In the first half of the transition, a
mosaic is gradually applied so that the
current image switches to the new
image by the 50% point. In the second
half of the transition, the mosaic effect
on the new image is gradually
reversed, returning to the original
image at 100%.
Defocus In the first half of the transition, the
defocus effect is gradually applied so
that the current image switches to the
new image by the 50% point. In the
second half of the transition, the
defocus effect on the new image is
gradually reversed, returning to the
original image at 100%.
Enhanced function mode DME
channels can be used.
Crop Slide The current image is cropped in half
as the new image appears, displaying
both images side by side. Then, the
cropped images slide sideways to
show only the new image.
Brick In 2-channel mode:
A brick with visible side surface slides
in over the current image, then rotates
so that the new image becomes
visible.
In 3-channel mode:
A brick appears over the current
image, expanding and rotating, and
switches to the new image.
Resizer Slide Executes a Slide DME wipe using a
resizer.
Resizer Squeeze Executes a Squeeze DME wipe using
a resizer.
Resizer Frame I/O Executes a Frame I/O DME wipe
using a resizer.
DME wipe execution mode and pattern
numbers
The execution modes and pattern numbers supported in
each DME wipe pattern group are shown in the following
table.
Depending on the DME wipe pattern, there are patterns
that can be used for backgrounds (transition with
background selected for next transition) and patterns that
can be used for keys (transition with key selected for next
transition or independent key transition).
a: Supported
×: Not supported
Pattern group Execution
mode
Slide 1ch
2ch
Squeeze 1ch
2ch
Split 1ch
Door 1ch
Flip Tumble 1ch
Page Turn 1ch
2ch
Roll 1ch
2ch
Frame I/O 1ch
2ch
P in P 1ch
2ch
Mosaic 1ch
113
Pattern Background Keys
a) b)
number
a a
1001 to
1008
2601 to a ×
2608
1021 to a a
1033
2621 to a ×
2628
1011 to a a
1013
1041 to a a
1044
1101, 1102 a ×
1301 to a a
1313, 1315
to 1318,
1341 to
1345
2701 to a a
2713, 2715
to 2718,
2741 to
2745
1321 to a a
1333, 1335
to 1338,
1346 to
1350
2721 to a a
2733, 2735
to 2738,
2746 to
2750
1201 to a a
1209, 1221
to 1225
2851 to a ×
2854, 2861
to 2864
1251 a ×
2651, 2652 a ×
1701 a ×