Selecting Sl Key Content - Sony XVS-G1 User Manual

2
Press the [Edit] button for [Fill].
The [Key Fill Bus] window appears.
3
Set the button for the target video signal to the on state.
Select a tab to change the V/K pair number to display.
4
Press [OK].
To select a key source signal
When the key source signal is set to split mode, select a key
source signal.
1
Open the Home > M/E-1 > Key1 > Type > Signal
Select menu (11101.14).
2
Press the [Source Type] button for [Source], and select
video signal/key signal from the pull-down list.
Video: Video signal
Key: Key signal
3
Press the [Edit] button for [Source].
The [Key Source Bus] window appears.
4
Set the button for the target video signal/key signal to
the on state.
Select a tab to change the V/K pair number to display.
5
Press [OK].

Selecting SL Key Content

You can load content into an SL key to use as a key fill/key
source.
You can select still image content in which a video signal
and key signal have been combined as a key fill/key
source.
For details about content operations, see "Content
Operations" (page 271).
This section describes the M/E-1 key 5 menu as an
example.
Note
Content loading and unloading operations are common to
the key 5 to key 8 menus. Content cannot be loaded/
unloaded individually for each key.
Loading content
You can load content into SL key memory from content
storage.
Note
If the system signal format is different than the image size,
the following processing occurs with the origin at the top
left of the image.
- If an image size is smaller, the missing part is filled with
black.
- If an image size is larger, the excess part is cropped and
removed.
Even when image size processing occurs, the thumbnail
image is not changed.
1
Open the Home > M/E-1 > Key5 > SL Key > Load
menu (11105.61).
Content can be displayed in list view or thumbnail
view.
To change content properties
Press the [Edit Properties] button and edit the
properties in the [Edit Properties] window.
For details, see "Editing Content Properties"
(page 275).
2
Select content to load.
To select and load multiple content, place a check
mark beside the target content to load.
To select and load all content, place a check mark in
the Select All checkbox.
3
Press the [Load to Memory] button.
4
Check the message, then press [OK].
Unloading content
You can unload content from SL key memory.
1
Open the Home > M/E-1 > Key5 > SL Key > Unload
menu (11105.62).
Content can be displayed in list view or thumbnail
view.
2
Select content to unload.
To select and unload multiple content, place a check
mark beside the target content to unload.
To select and unload all content, place a check mark in
the Select All checkbox.
3
Press the [Unload from Memory] button.
To unload currently recalled content
Place a check mark in [Forcibly unload recalled
contents].
4
Check the message, then press [OK].
80