Editing A Shotbox Register - Sony XVS-G1 User Manual

• Region display
Displays the regions registered in the register in white
characters.
When the [Edit Shotbox] button is pressed, the Home >
Register > Shotbox > Edit Shotbox menu (18306.11) is
recalled.
For details, see "Creating and Editing a Shotbox"
(page 230).
Setting auto run
You can set auto run for a register.
Note
Auto run cannot be set for a locked register.
1
Open the Home > Register > Shotbox > Edit Register
> Browse menu (18306.21).
2
Select the target register to set.
To select and set multiple registers, place a check mark
beside the target registers to set.
To select and set all registers, place a check mark in the
Select All checkbox.
You can also press the [Select Register(s)] button and
enter a register number in the numeric keypad
window.
3
Set auto run.
To enable auto run
Press the [Auto Run On] button.
To disable auto run
Press the [Auto Run Off] button.

Editing a Shotbox Register

You can copy, move, and swap register data. You can also
rename, lock, and delete a register.
Copying a register
Notes
• An empty register cannot be copied.
• A locked register cannot be copied.
1
Open the Home > Register > Shotbox > Edit Register
> Copy/Move/Swap menu (18306.22).
A list of copy source registers is shown on the left, and
a list of copy destination registers is shown on the
right.
2
In the list on the left, select a copy source register.
To select and copy multiple registers, place a check
mark beside the target registers to copy.
To select and copy all registers, place a check mark in
the Select All checkbox.
You can also press the [Select Register(s)] button and
enter a register number in the numeric keypad
window.
3
In the list on the right, select a copy destination
register.
When multiple registers are selected, select the first
copy destination register.
You can also press the [Select Destination] button and
enter a register number in the numeric keypad
window.
The copy destination of the first register selected on
the left is the first register selected on the right, and the
subsequent registers on the right in the same relative
positions as the selected registers on the left become
copy destinations. The first register on the right is
shown in light blue, and the subsequent copy
destination registers are shown in blue gray.
4
Press the [Copy] button.
5
Check the message, then press [OK].
To copy without renaming a destination register
Set the [w/o Name] button to the on state.
Moving a register
Notes
• An empty register cannot be moved.
• A locked register cannot be moved.
Select a move source register and move destination
register in the same way as for copying a register and press
the [Move] button.
For details, see "Copying a register" (page 232).
To move without renaming a destination register
Set the [w/o Name] button to the on state.
Swapping registers
Select the registers to swap in the same way as for copying
a register and press the [Swap] button.
For details, see "Copying a register" (page 232).
To swap without renaming the registers
Set the [w/o Name] button to the on state.
232