Executing An Effect Timeline; Executing An Effect Timeline (Utility Control Block) - Sony XVS-G1 User Manual

No. Parameter Adjustment
2 Bias Bias
3 Continuity Continuity
Note
When the path type for a curve (Curve) is set to [Off],
the cross-point hold (Xpt Hold) and hue (Hue) settings
are disabled. When the path type for a curve (Curve) is
set to [Step], the hue (Hue) setting is disabled.
Executing an Effect
Timeline
You can execute an effect timeline using the utility control
block or the menu.
You can also recall a shotbox register with a registered
effect timeline region and register in the Flexi Pad control
block to execute an effect timeline.
For details, see "Executing a Shotbox (Flexi Pad Control
Block)" (page 234).
Executing an Effect Timeline (Utility
Control Block)
Selecting a region and recalling an effect timeline register
are controlled using the menu.
For details, see "Recalling an Effect Timeline"
(page 200).
You can also select a region and recall an effect timeline
register by recalling a shotbox register in the utility control
block.
For details, see "Executing a Shotbox (Utility Control
Block)" (page 234) and "Assigning a Utility Function"
(page 318).

Executing an effect timeline

Press the [RUN] button.
The [RUN] button is lit amber and the effect timeline is
executed.
When stopped by a pause, the [RUN] button is lit green.
Press the [RUN] button, lighting it amber, to resume effect
timeline execution.
Note
You can set the operation when the [RUN] button is
pressed again during effect timeline execution.
For details, see "Setting the operation when the [RUN]
button is pressed during effect timeline execution"
(page 328).
Moving to the start point/stop point
Press the [REWIND] button.
When executing in the normal direction, this moves to the
start point timecode.
209