Key Snapshot Register Operations; Displaying A Key Snapshot Register; Editing A Key Snapshot Register - Sony XVS-G1 User Manual

Key Snapshot Register
Operations

Displaying a Key Snapshot Register

Open the Home > Register > Key Snapshot > Edit Register
> Browse menu (18303.11).
You can check the following information.
[Key Region] group region display:
Displays the selected switcher bank and key.
Register list:
Displays a list of registers for the selected key.
• Register number
• Register name
• Lock icon
A lock icon is displayed when a register is locked.
To select a key
1
Press the [Select] button in the [Key Region] group.
The [Select Key Region] window appears.
2
Set the button for the target key to the on state.
3
Press [OK].

Editing a Key Snapshot Register

You can copy, move, and swap register data. You can also
rename, lock, and delete a register.
Copying a register
Notes
• An empty register cannot be copied.
• A locked register cannot be copied.
1
Open the Home > Register > Key Snapshot > Edit
Register > Copy/Move/Swap menu (18303.12).
A list of copy source registers is shown on the left, and
a list of copy destination registers is shown on the
right.
2
Press the [Select] button in the [Key Region] group on
the left.
The [Select Region] window appears.
3
Set the button for the copy source key to the on state.
4
Press [OK].
5
In the list on the left, select a copy source register.
To select and copy multiple registers, place a check
mark beside the target registers to copy.
To select and copy all registers, place a check mark in
the Select All checkbox.
You can also press the [Select Register(s)] button and
enter a register number in the numeric keypad
window.
6
Press the [Select] button in the [Key Region] group on
the right.
The [Select Region] window appears.
7
Set the button for the copy destination key to the on
state.
8
Press [OK].
9
In the list on the right, select a copy destination
register.
When multiple registers are selected, select the first
copy destination register.
You can also press the [Select Destination] button and
enter a register number in the numeric keypad
window.
The copy destination of the first register selected on
the left is the first register selected on the right, and the
subsequent registers on the right in the same relative
positions as the selected registers on the left become
copy destinations. The first register on the right is
shown in light blue, and the subsequent copy
destination registers are shown in blue gray.
10
Press the [Copy] button.
11
Check the message, then press [OK].
To copy without renaming a destination register
Set the [w/o Name] button to the on state.
Moving a register
Notes
• An empty register cannot be moved.
• A locked register cannot be moved.
Select a move source register and move destination
register in the same way as for copying a register and press
the [Move] button.
For details, see "Copying a register" (page 225).
225