Displaying A Shotbox Register - Sony XVS-G1 User Manual

2
Set the button for the target region to the on state.
You can select multiple regions.
The selected regions are displayed in white characters
in the region display section at the top.
Select a tab to change the region to display.
[ME] tab: Switcher bank regions
[User] tab: User regions
[DME] tab: DME regions
[External Device] tab: External device regions
To select all regions configured beforehand
Set the [All Regions] button to the on state.
For details about setting the regions selected
simultaneously, see "Setting Regions Selected
Simultaneously" (page 316).
3
Press [OK].
The selected regions are added to the list on the right.
4
In the list on the right, select the target region to set.
To select and set multiple regions, place a check mark
beside the target regions to set.
To select and set all regions, place a check mark in the
Select All checkbox.
Note
A register cannot be set when a key snapshot region is
selected at the same time as an effect timeline/
snapshot region.
5
In the list on the right, press the [Register] button and
enter a register number in the numeric keypad
window.
To browse an effect timeline/snapshot register
Press the [Browse Single Rgn] button.
For an effect timeline, the Home > Register > Effect
Timeline > Edit Register > Browse Single Rgn menu
(18301.32) is recalled.
For a snapshot, the Home > Register > Snapshot > Edit
Register > Browse Single Rgn menu (18302.12) is
recalled.
To register a key snapshot region (switcher bank)
and register
1
Press the [Key Snapshot] button in the [Add Region/
Function] group.
The [Add Key Snapshot Regions] window appears.
2
Set the button for the target region (switcher bank) to
the on state.
You can select multiple regions.
3
Press [OK].
The selected regions are added to the list on the right.
4
In the list on the right, select the target region to set.
To select and set multiple regions, place a check mark
beside the target regions to set.
To select and set all regions, place a check mark in the
Select All checkbox.
Note
A register cannot be set when an effect timeline/
snapshot region is selected at the same time as a key
snapshot region.
5
In the list on the right, press the [Edit] button.
The [Edit Register] window appears.
6
Press the button for the target key and select a register
from the pull-down list.
7
Press [OK].
Deleting a region
You can delete a region registered in a shotbox.
1
Open the Home > Register > Shotbox > Edit Shotbox
menu (18306.11).
2
In the list on the left, select a shotbox register.
3
In the list on the right, select the target region to delete.
To select and delete multiple regions, place a check
mark beside the target regions to delete.
To select and set delete regions, place a check mark in
the Select All checkbox.
4
Press the [Delete Region] button.
5
Check the message, then press [OK].

Displaying a Shotbox Register

Open the Home > Register > Shotbox > Edit Register >
Browse menu (18306.21).
You can check the following information.
• Register number
• Register name
• Lock icon
A lock icon is displayed when a register is locked.
• "Run" icon
A "Run" icon is displayed when auto run is set for a
register.
231