Selecting A Region - Sony XVS-G1 User Manual

> Device 10 > Device 11 > Device 12 > P-Bus > GPI > • Reference region: Inverted display
Macro > Router

Selecting a Region

When selecting the target region in the menus for effect
timelines and snapshots, the region selection window
appears.
Note
The display of the region selection window varies
depending on the menu.
Region display section All Regions button
Region selection buttons
When separate pages are displayed for each type of region,
select a tab to switch the display.
To select a region, press the target region selection button,
turning it on. A blue bar is displayed across the bottom of
the button.
To cancel a selection, press the target region selection
button, turning it off.
To select all regions
You can press the [All Regions] button to select all regions
configured beforehand at the same time.
If you press the [All Regions] button while the target
regions are not selected, then the target regions are selected
at the same time.
If the target regions are selected, then the target regions are
deselected at the same time.
For details about setting the regions selected
simultaneously, see "Setting Regions Selected
Simultaneously" (page 316).
Region display section
The region display section shows the region selection
status.
• Selected region: White text
• Deselected region: Gray text
45