Disk Recorder File Operations - Sony XVS-G1 User Manual

To clear the setting
Press the [Clear] button in the [Start TC] group.
5
Press the left button in the [Stop TC] group and enter
a stop point timecode in the numeric keypad window.
To clear the setting
Press the [Clear] button in the [Stop TC] group.
6
Press the left button in the [Variable Speed] group and
enter a variable speed in the numeric keypad window.
To calculate variable speed automatically
Press the [Fit] button in the [Variable Speed] group.
The duration calculated from the start point and stop
point is compared with the keyframe duration, and the
variable speed is calculated automatically.
To clear the setting
Press the [Clear] button in the [Variable Speed] group.
To test an action command output
Press the [Test Fire] button.
Setting an action when rewind is executed
On a DDR/VTR timeline, normally when the [REWIND]
button is pressed, an action set for the first keyframe is not
executed. When the [RUN] button is pressed, then the first
keyframe action is executed.
To execute a specific action when the [REWIND] button
is pressed, set a rewind action.
Note
The rewind action is enabled when you press the
[REWIND] button, even if you have configured an action
for the first keyframe to be executed after rewinding.
For details, see "Setting the operation of the first keyframe
when rewind is executed" (page 328).
1
Open the Home > External Device > Device >
Timeline > Rewind Action menu (16101.42).
Rewind action settings information is displayed for
each device channel number (1 to 12).
2
Select the target device for operation.
3
In the [Action] group, select an action to set.
Cueup: Set a cueup action.
Start: Set a start action.
Stop: Set a stop action.
4
Press the left button in the [Start TC] group and enter
a start point timecode in the numeric keypad window.
To clear the setting
Press the [Clear] button in the [Start TC] group.
5
Press the left button in the [Stop TC] group and enter
a stop point timecode in the numeric keypad window.
To clear the setting
Press the [Clear] button in the [Stop TC] group.
6
Press the left button in the [Variable Speed] group and
enter a variable speed in the numeric keypad window.
To clear the setting
Press the [Clear] button in the [Variable Speed] group.
To set a currently loaded file as the rewind action
target
Press the [File Set] button.
To test an action command output
Press the [Test Fire] button.

Disk Recorder File Operations

Recorded content on a disk recorder is managed as files.
Loading a File
To control playback and other operations on a disk
recorder, the target file from the file list in the disk recorder
must be loaded.
Note
Folder selection is required for the AMP protocol. The
files in the selected folder are displayed in the file list.
For details, see "Selecting a folder" (page 172).
File list sharing
You can share the file list when a single disk recorder is
connected to multiple ports.
For details, see "Configuring file list sharing" (page 322).
Note
A file list cannot be shared for the AMP protocol.
Displaying a file list
1
Open the Home > External Device > Device > File List
menu (16101.21).
2
Display the target device to set.
Select a tab to change the device (Device Ch1 to
Device Ch12) to display.
171