Clip Player Operations; Assigning Clip Player Outputs; Selecting A Clip Player Output Channel - Sony XVS-G1 User Manual

When group mode is enabled and combined content is
selected, content 1 and content 2 of the combined content
are recalled on the two combined clip player output
channels, respectively.
For details, see "Combining Content" (page 276).
Audio playback
You can play audio using normal video content playback.
To play audio, first enable audio on the target clip player
output channel for operation.
Notes
• To play audio, set the signal output to through mode.
For details about through mode, see "Setting Through
Mode" (page 297).
• The AUX bus and edit preview bus are the only buses
that can output audio.
• In loop playback, audio fades in at the playback start
point and fades out at the playback stop point.
• In variable-speed playback, audio is not played.
• Noise may occur if a clip player output cross-point is
switched during audio playback.
Importing/exporting
Clip player content can be imported from a computer using
the Home > Content > Import/Export menu. You can also
export multiple content together as an archive file and
import an exported archive file into content storage.
For details, see "Importing/Exporting Content"
(page 278).

Clip Player Operations

Assigning Clip Player Outputs

To output clip player images to a monitor, for example, the
output signals from the clip player (CLIP1 to CLIP4) must
be assigned to cross-point buttons beforehand.
For details about assignment, see "Creating a Cross-
Point Assign Table" (page 301).
Selecting a Clip Player Output
Channel
Displaying the clip player output channel
status
Open the Home > Clip Player > Clip Common > Channel
> Status menu (14103.31).
The status of the clip player output channels is shown on
the left, and the properties of the content recalled on the
selected clip player output channel are shown on the right.
The following information is displayed in the clip player
output channel status.
• Clip player output channel
For combined channels, this is displayed in odd-
numbered channel/even-numbered channel format.
• Recalled content thumbnail
"No Thumbnail" is displayed if there is no thumbnail for
the content.
• Name of recalled content
• Status icon
Icon Status
Black output
Video playback
Video stopped
Audio enabled
Audio disabled
Locked
A thumbnail and content information are displayed in the
content properties.
137