Freeze Effects; Setting A Freeze; Nonlinear Effects; Setting A Nonlinear Effect - Sony XVS-G1 User Manual

Freeze Effects

The following three types of freeze effects can be set.
Hard freeze: Generate a still image at an arbitrary position.
Time strobe: Generate still images at fixed intervals.
Film: Generate frames like in movie films.
This section describes the menu for DME channel 1 as an
example.

Setting a Freeze

1
Open the Home > DME > Channel1 > Freeze menu
(15101.41).
2
In the [Freeze] group, select a type of freeze.
Hard Freeze: Hard freeze
Time Strobe: Time strobe
Film: Film
When the [Time Strobe] button is selected, set the
following parameters.
No. Parameter
1 Duration
2 Live
When the [Film] button is selected, set the following
parameter.
No. Parameter
1 Film
Adjustment
Freeze interval
Percentage of video time
between still images
Adjustment
Frame rate

Nonlinear Effects

It is not possible to apply two or more nonlinear effects at
the same time. Enabling an effect automatically disables
the previously enabled effect.
This section describes the menu for DME channel 1 as an
example.

Setting a Nonlinear Effect

Select a type of nonlinear effect to enable.
1
Open the Home > DME > Channel1 > Non Linear >
Effect List menu (15101.51).
2
Press the button for the nonlinear effect to enable.
The setup menu for the selected nonlinear effect
appears and nonlinear effects become enabled.
To disable nonlinear effects
Press the [Off] button.

Setting a Page Turn

In the Home > DME > Channel1 > Non Linear > Effect
List menu (15101.51), press the [Page Turn] button to
display the Home > DME > Channel1 > Non Linear > Page
Turn menu (15101.52).
In the Home > DME > Channel1 > Non Linear > Page
Turn menu (15101.52), set the [Page Turn] button to the on
state and set the following parameters.
No. Parameter
1 Radius
2 Offset
3 Angle
To split an image
In the [Split Mode] group, select a type of split.
H&V: Split horizontally and vertically (top, bottom, left,
right)
H: Split horizontally (left, right)
V: Split vertically (top, bottom)
To select a signal to insert on the back side of the
page
In the [Back Video] group, select a signal.
Self: Same signal as the front side
Flat: Single color
Hue Rotation: Gradually varying hue
2nd Channel: 2nd channel signal
157
Adjustment
Radius of the turned page flap
Amount of page turn
Angle of page turn