Sony XVS-G1 User Manual page 156

Note
If a border has been set and then masks are enabled on both
group 1 effects and group 2 effects, the Border effect will
also be masked.
1
Open the Home > DME > Channel1 > Video Modify
> Mask menu (15101.34).
2
In [Effect Group], set the [Mask] switch for the target
effect to the on state.
Group 1: Sepia, Mono, and Mosaic effects
Group 2: Defocus effect
3
Press the [Position/Size] button and set the mask
pattern using the following parameters.
No. Parameter
1 H
2 V
3 Size
4 Soft
5 Pattern
Note
The mask patterns are the same as wipe pattern
numbers 21, 24, and 304.
To set the aspect ratio of a mask pattern (Aspect)
Press the [Aspect] button and set the following parameter.
No. Parameter Adjustment
1 Aspect Aspect ratio
• Negative values expand
• Positive values expand
To rotate a mask pattern
In the [Rotation] group, select a rotation type.
Angle: Incline a pattern at a fixed angle.
Speed: Rotate a pattern at a fixed speed.
When the [Angle] button is selected, set the following
parameter.
No. Parameter Adjustment
1 Angle Inclination angle of pattern
• A value of –1.00 corresponds to
• A value of +1.00 corresponds to
• A value of 0.00 corresponds to
When the [Speed] button is selected, set the following
parameter.
Adjustment
Horizontal position
Vertical position
Size
Softness
Pattern number (21, 24, 304)
vertically.
horizontally.
a rotation of one turn
counterclockwise.
a rotation of one turn clockwise.
no rotation.
No. Parameter
1 Speed
To invert a mask area
Set the [Invert] button to the on state.
156
Adjustment
Rotation speed of pattern
• A value of –100.00 corresponds
to 4 revolutions/second
counterclockwise rotation.
• A value of +100.00 corresponds
to 4 revolutions/second
clockwise rotation.
• A value of 0.00 corresponds to
no rotation (stationary).