Frame Memory Operations; Assigning A Frame Memory Output; Selecting An Input Signal; Selecting A Frame Memory Output Channel - Sony XVS-G1 User Manual

Frame Memory
Operations

Assigning a Frame Memory Output

To output frame memory images to a monitor, for
example, the output signals from frame memory (FM1 to
FM16) must be assigned to cross-point buttons
beforehand.
For details about assignment, see "Creating a Cross-
Point Assign Table" (page 301).

Selecting an Input Signal

You can use the frame memory source 1 bus or 2 bus signal
for the input to frame memory.
Select a signal in a cross-point button row assigned with
the frame memory source 1 bus or 2 bus.
For details about selecting a signal, see "Chapter 4
Selecting Signals" (page 46).
Selecting a Frame Memory Output
Channel
Displaying the frame memory output
channel status
Open the Home > Frame Memory > FM Common >
Channel > Status menu (13109.31).
The status of the frame memory output channels is shown
on the left, and the properties of the content recalled on the
selected frame memory output channel are shown on the
right.
The following information is displayed in the frame
memory output channel status.
• Frame memory output channel
For combined channels, this is displayed in odd-
numbered channel/even-numbered channel format.
• Recalled content thumbnail
"No Thumbnail" is displayed if there is no thumbnail for
the content.
• Name of recalled content
• Status icon
Icon Status
Black output
Through output
Still image recall output
Video playback
Video reverse playback
Video stopped
Video recording
Audio enabled
Audio disabled
Locked
A thumbnail and content information are displayed in the
content properties.
For details, see "Properties display" (page 272).

Selecting a frame memory output channel

Use the menu for the target frame memory output channel
for operation.
When frame memory output channel 1 (FM1) or frame
memory output channel 2 (FM2) is selected, open the
following menu.
To recall still image content or video content:
Open the Home > Frame Memory > FM1/FM2 > Clip/
Still > Recall menu (13101.11).
The odd-numbered frame memory output channel
(FM1) is shown on the upper left, and the even-
numbered frame memory output channel (FM2) is
shown on the lower left. Content can be displayed in
list view or thumbnail view on the right.
For combined channels, the combined frame memory
output channels (FM1/FM2) are shown on the left.
To play video content:
Open the Home > Frame Memory > FM1/FM2 > Clip/
Still > Play menu (13101.12).
Information and operation buttons for the odd-
numbered frame memory output channel (FM1) are
shown at the top, and information and operation
128