Executing An Effect Timeline (Menu) - Sony XVS-G1 User Manual

When executing in the reverse direction, this moves to the
stop point timecode.
Note
If the start point is set lower than 01:00:00:00, pressing the
[REWIND] button moves to 01:00:00:00.
Setting the execution direction
Set using the following buttons.
[NORM] button: Execute in the normal direction (from
the first keyframe to the last keyframe).
[NORM/REV] button: Execution direction changes each
time the effect timeline execution finishes.
[REV] button: Execute in the reverse direction (from the
last keyframe to the first keyframe).
Setting a loop
Press the [EFF LOOP] button, turning it on.
When an effect timeline is executed, it repeats executing in
an infinite loop.
To stop the loop, press the [EFF LOOP] button, turning it
off. You can also stop by pressing the [REWIND] button.

Executing an Effect Timeline (Menu)

Executing an effect timeline
1
Display the [Effect Timeline Recall/Store] taskbar.
The effect timeline switches to recall/store mode.
2
Select a region and recall an effect timeline register.
For details, see "Recalling an Effect Timeline"
(page 200).
3
Press the [Run] button.
The effect timeline is executed.
Note
You can set the operation when the [Run] button is
pressed again during effect timeline execution.
For details, see "Setting the operation when the
[RUN] button is pressed during effect timeline
execution" (page 328).
Moving to the start point/stop point
1
Display the [Effect Timeline Recall/Store] taskbar.
The effect timeline switches to recall/store mode.
2
Select a region and recall an effect timeline register.
For details, see "Recalling an Effect Timeline"
(page 200).
3
Press the [Rewind] button.
When executing in the normal direction, this moves to
the start point timecode.
When executing in the reverse direction, this moves to
the stop point timecode.
Note
If the start point is set lower than 01:00:00:00, pressing
the [REWIND] button moves to 01:00:00:00.
Setting the execution direction
1
Display the [Effect Timeline Recall/Store] taskbar.
The effect timeline switches to recall/store mode.
2
Select a region and recall an effect timeline register.
For details, see "Recalling an Effect Timeline"
(page 200).
3
Press the [Run Control] button.
The [Run Control] window appears.
4
In the [Direction] group, select an execution direction.
Normal: Execute in the normal direction (from the
first keyframe to the last keyframe).
Normal/Reverse: Execution direction changes each
time the effect timeline execution finishes.
Reverse: Execute in the reverse direction (from the
last keyframe to the first keyframe).
5
Press [OK].
Setting a loop
1
Display the [Effect Timeline Recall/Store] taskbar.
The effect timeline switches to recall/store mode.
2
Select a region and recall an effect timeline register.
For details, see "Recalling an Effect Timeline"
(page 200).
3
Press the [Run Control] button.
The [Run Control] window appears.
4
Set the [Effect Loop] button to the on state.
210