Sony XVS-G1 User Manual page 186

The color space (BT.709 or BT.2020) is displayed for
each AUX bus assigned to an output that can be
configured with a color corrector/HDR converter.
2
Select the target AUX bus to set.
3
Set the [CCR] button in the [CCR] group to the on
state.
The color corrector is enabled.
Set the video process, primary color correction, and
RGB clip functions, as required.
To disable a color corrector
Set the [CCR] button in the [CCR] group to the off state.
To return color corrector settings to the defaults
Press the [Unity] button in the [CCR] group, check the
message, then press [OK].
All color corrector function settings are returned to the
defaults.
Setting the video process function
1
Open the Home > Other Effects > Aux Bus > Aux Bus
CCR menu (18102.21).
2
Select the target AUX bus to set.
3
Set the [Video Process] button in the [Video Process]
group to the on state and set the following parameters.
No. Parameter
1 Video Gain
2 Y Gain
3 C Gain
4 Hue Delay
5 Black Level
To return the video process function settings to
the defaults
Press the [Unity] button in the [Video Process] group,
check the message, then press [OK].
Setting primary color correction
The following types of correction can be applied to each of
the RGB signals.
• Black balance adjustment: Sets the output level for a 0%
level input signal.
• White balance adjustment: Sets the output level for a
100% level input signal.
• Gamma correction: Adjusts the curvature of the gamma
curve.
• Knee correction: Adjusts the position of the knee of the
gamma curve.
Adjustment
Video signal gain
Luminance signal gain
Chrominance signal gain
Hue delay
Black level
Output level
Black
balance
adjustment
Output level
Knee correction
1
Open the Home > Other Effects > Aux Bus > Aux Bus
CCR menu (18102.21).
2
Select the target AUX bus to set.
3
Set the [Primary CCR] button in the [Primary CCR]
group to the on state.
4
In the [Primary CCR Adjust] group, select an
adjustment item.
Black: Black balance adjustment
White: White balance adjustment
Gamma: Gamma correction
Knee: Knee correction
5
Set the following parameters.
186
White balance
adjustment
Input level
Gamma
correction
Input level
Unadjusted signal
Adjusted signal