Executing A Shotbox (Menu) - Sony XVS-G1 User Manual

1
Select a bank.
The target utility/shotbox bank is assigned to a cross-
point button row.
For details about selecting a bank, see "Selecting a
bank" (page 180).
2
Press the button for the target register to recall.
When a button assigned with a shotbox register is
pressed, the button is lit amber and the shotbox is
recalled.
When auto run is enabled, the registered effect
timeline is executed at the same time the register is
recalled.
To execute an effect timeline
You can execute using the utility control block or the
menu.
For details about executing using the utility control block,
see "To execute an effect timeline" (page 234).
For details about executing using the menu, see "To
execute an effect timeline" (page 235).

Executing a Shotbox (Menu)

1
Open the Home > Register > Shotbox > Edit Shotbox
menu (18306.11).
2
In the list on the left, select the target shotbox register
to recall.
You can also press the [Select Register] button and
enter a register number in the numeric keypad
window.
3
Press the [Recall] button.
The shotbox is recalled.
When auto run is enabled, the registered effect
timeline is executed at the same time the register is
recalled.
To execute an effect timeline
In the [Effect Timeline Recall/Store] taskbar, press the
[Run] button.
To move to the start point of an effect timeline, press the
[Rewind] button.
Notes
• When auto run is disabled, an effect timeline is not
executed when a shotbox register is recalled. Press the
[Run] button to execute.
• You can set the operation when the [Run] button is
pressed again during effect timeline execution.
For details, see "Setting the operation when the [RUN]
button is pressed during effect timeline execution"
(page 328).
235