Snapshot Register Operations; Displaying A Snapshot Register - Sony XVS-G1 User Manual

Snapshot Register
Operations

Displaying a Snapshot Register

Displaying a multi-region snapshot
register
Open the Home > Register > Snapshot > Edit Register >
Browse Multi Rgn menu (18302.11).
You can check the following information.
[Region] group region display:
Displays the region selection status.
The selected regions are displayed in white characters,
and the reference region is displayed inverted.
List on the left:
Displays a list of registers for the selected regions.
• Register number
• Reference region register name
• Number of regions for which data is saved in the
register
• Lock icon
A lock icon is displayed when the reference region
register is locked.
List on the right:
Displays information for each region about the register
selected in the list on the left.
• Region name
Displays the reference region inverted.
• Register name
• Lock icon
A lock icon is displayed when a register is locked.
When the [Browse Single Rgn] button is pressed, the
Home > Register > Snapshot > Edit Register > Browse
Single Rgn menu (18302.12) is recalled.
For details, see "Displaying a single-region snapshot
register" (page 221).
To select a region
1
Press the [Select] button in the [Region] group.
The [Select Region] window appears.
2
Set the button for the target region to the on state.
You can select multiple regions.
Select a tab to change the region to display.
[ME] tab: Switcher bank regions
[User] tab: User regions
[DME] tab: DME regions
[External Device] tab: External device regions
The last selected region becomes the reference region.
To select all regions configured beforehand
Set the [All Regions] button to the on state.
For details about setting the regions selected
simultaneously, see "Setting Regions Selected
Simultaneously" (page 316).
3
Press [OK].
Displaying a single-region snapshot
register
Open the Home > Register > Snapshot > Edit Register >
Browse Single Rgn menu (18302.12).
You can check the following information.
[Region] group region display:
Displays the selected region name.
Register list on the left:
Displays a list of registers for the selected region.
• Register number
• Register name
• Configured attributes
• Lock icon
A lock icon is displayed when a register is locked.
Attribute display on the right:
Displays the attributes for the register selected in the
list on the left.
To select a region
1
Press the [Select] button in the [Region] group.
The [Select Region] window appears.
2
Set the button for the target region to the on state.
Select a tab to change the region to display.
[ME] tab: Switcher bank regions
[User] tab: User regions
[DME] tab: DME regions
[External Device] tab: External device regions
3
Press [OK].
Setting an attribute
You can add attributes to a snapshot.
The attributes that can be configured vary depending on
the region.
For details, see "Configurable attributes" (page 215).
1
Open the Home > Register > Snapshot > Edit Register
> Browse Single Rgn menu (18302.12).
2
Select the target region to set.
For details about selecting a region, see "To select a
region" (page 221).
221