Cross-Point Control Block - Sony XVS-G1 User Manual

a M/E banks (switcher banks)
Each bank is comprised by a cross-point control block,
transition control block, and Flexi Pad control block. By
default, M/E-1 and P/P switcher banks are assigned in
order to the banks from the back.
The ICP-X1124 and ICP-X1116 have only one M/E bank
row. By default, the P/P switcher bank is assigned to the
bank.
You can change the switcher bank assignments.
For details, see "Assigning a Switcher Bank" (page 315).

Cross-Point Control Block

The cross-point control block is used to select the signals
to be used in the switcher bank.
The button rows on the cross-point control block are set to
key/AUX bus delegation mode by default.
1st row
2nd row
3rd row
4th row
a
b
c
a
b Cross-point control block (see page 15)
The ICP-X1216 and ICP-X1116 each have 16 cross-point
buttons.
c Transition control block (see page 18)
d Flexi Pad control block (see page 20)
e Device control block (see page 21)
f Utility control block (see page 25)
You can set the mode to key bus mode or free assign mode
in the Home > Setup > Panel > Xpt Module > Operation
Mode menu (19104.31).
For details, see "Chapter 4 Selecting Signals" (page 46).
15
d